Sony DWR-R02D User Manual page 26

Save all: Saves the RF and QL data acquired for all
receiver channels displayed in the receiver channel list to
a file.
b Receiver channel list
Displays a list of receiver channels.
c Display area
RF Level: Indicates the RF level display mode.
Alert: Indicates the display status of alert information.
QL: Indicates the display status of QL information.
Time: Indicates the display mode of time information.
Setting: Click this button to open the Display Setting
screen. The Display Setting screen allows you to configure
display settings for RF Level, Alert, QL, and Time.
For details, see "Display Setting" on page 26.
d Graph display area
Displays the monitoring results for the signal environment
selected in the receiver channel list as a graph.
Mark: Allows you to insert memos into the graph.
For details, see "Mark function" on page 27.
Diversity max hold: Displays the maximum Diversity
value for the RF data displayed in the graph.
Diversity min hold: Displays the minimum Diversity
value for the RF data displayed in the graph.
Auto Scroll: Place a check mark here to scroll the graph
automatically to always display the most recent data.
Zoom: Zoom in or zoom out on the graph.
Scroll bar: Scrolls across the time axis.
e Alert display area
If a problem occurs with the signal environment during
monitoring, a portion of the graph will be displayed in red.
If you click this portion, the nature of the problem will
appear in the alert display area.
The messages that appear in RF Chart Grapher are as
follows.
Message
Rf level is excessive.
Rf level is low.
26
Sub Window
Meaning
The signal reception level is
excessively high.
The signal reception level has
dropped.
Meaning
Message
Quality level is low. The quality of received audio data
is deteriorated.
Communication time- The number of retries has
out occurred. exceeded the limit and a timeout
error has occurred.
The process of Search processing is complete.
searching devices was
executed.
WirelessStudio was not RF data and QL data could not be
able to acquire data acquired within the graph update
before updating graph. cycle.
Note
Data is updated every second in
RF Chart Grapher. However, if
the processing load on the PC is
high or if network communication
is heavy, the data may not be
acquired.
Display Setting
As both excessively high and excessively low RF levels
can result in audio loss, appropriate levels must be
maintained. You can switch between RF level displays in
the RF Chart Grapher screen to monitor whether proper RF
levels are maintained.
You can also configure how alert, QL, and time
information are displayed on the graph.
RF Level
Specify the method of RF level monitoring.
Overview: Monitors the RF level for the selection made
under "Diversity." This display mode allows you to
monitor excessively high and low RF levels. You can
specify what to monitor by selecting or clearing the "ave
level," "max level," and "min level" check boxes.
Detail: Monitors RF levels by antenna. This allows a more
detailed monitoring of RF levels when compared to
Overview mode. The "Individual max" display mode is