Security Menu - HP OmniBook 7100 Reference Manual

WSS I/O address
AdLib I/O address
Interrupt
1st DMA channel
2nd DMA channel
MPU Device
(OmniBook 7100 only)
MPU I/O address
Interrupt

Security Menu

User Password Is
Administrator Password Is
Set User Password
Set Administrator Password
Boot
Resume*
Undock*
Internal Hard Disk Drive
Lock*
Floppy Boot
* Resume, Undock, and Internal Hard Disk Drive Lock options are available only if Boot option is
enabled.
Configuring the OmniBook with the BIOS Setup Utility
Sets the Windows Sound System I/O address.
Sets the AdLib synthesizer I/O address.
Sets the interrupt.
Sets the DMA channel for playback.
Sets the DMA channel for recording.
Sets how the MIDI capability (hardware
wavetable) is configured by the BIOS (specified or
automatic).
Sets the MIDI I/O address.
Sets the interrupt.
Shows if a user password is set.
Shows if an administrator password is set.
Press ENTER to set, change, or clear user
password. Password length can be no longer than
8 characters, 0-9, A-Z.
Press ENTER to set, change, or clear administrator
password. This password protects BIOS Setup
settings.
Sets whether a user password is required when
the computer boots.
Sets whether a user password is required when
resuming from a suspended state.
Sets whether a user password is required when
undocking the OmniBook.
Encodes the current user password (or
administrator password if that is the only
password set), on the internal hard disk drive.
Sets whether the floppy drive is a boot device.
Introducing the OmniBook
530h
388h
IRQ5
DMA1
DMA0
Disabled
330h
IRQ11
Default
Clear
Clear
Enabled
Enabled
Disabled
Disabled
Enabled
1-13