Flexible Recording; Recording From A Video Cassette Recorder; Recording Time - Panasonic DMR-E85H DIGA Operating Instructions Manual

Recording television programs
Refer to the control reference on page 16.

Flexible Recording

[HDD] [RAM] [DVD-R]
The unit sets the best possible picture quality that fits the recording
within the remaining disc space.
e.g.,
Recorded Remain
45 minutes in
SP mode
60 minutes
Program to be recorded
Preparation
Select the channel to record.
Press [HDD] or [DVD] to select the recording drive.
While stopped
Press [FUNCTIONS].
Press [ ,
"FLEXIBLE RECORDING" and press
[ENTER].
FLEXIBLE REC
Record in FR mode
Maximum rec time 3 Hour 00 Min.
Set recording time 3 Hour 00 Min.
Start Cancel
Press [ ,
"Min." and press [ ,

recording time.

You can also set the recording time with the numbered
buttons.
You cannot record more than 8 hours.
When you want to start recording
Press [ ,
and press [ENTER].
Recording starts.
The recording mode becomes FR mode.
To exit the screen without recording
Press [RETURN].
To stop recording partway
Press [ ].
To show the remaining time
Press [STATUS].
RQT7305
18
Perfectly fit!
Recording rate
between SP and LP
, , ] to select
] to select "Hour" and
] to set the
, , ] to select "Start"
DVD-RAM
Remaining
REC 0:59
time
CH71
Stereo
Recording from a video cassette
recorder
[HDD] [RAM] [DVD-R]
Preparation
Connect a video cassette recorder to this unit's input terminals.
Press [HDD] or [DVD] to select the recording drive.
[Note]
When recording using this unit's input terminals, only the sound
received at the time of recording will be recorded.
As long as secondary audio that is recorded on the video cassette is
not output on the unit in play, it is not recorded.
e.g.: Connecting to the L2 input terminals
POWER
PULL OPEN
L2 S-VIDEO IN VIDEO IN L/MONO AUDIO IN R
S-VIDEO IN VIDEO IN
Yellow White Red
S-Video
cable
Other video equipment
If the audio output of the other equipment is monaural, connect to L/
MONO.
The S-VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.
While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
e.g., If you have connected to L2 input terminals, select "L2".
Press [REC MODE] to select the
recording mode (XP, SP, LP or EP).
Using Flexible Recording (➡ left), you can save content of a
video cassette to 1 disc with the best possible quality of
recording without wasting disc space.
Start play on the other equipment.
Press [ REC].
Recording starts.
To skip unwanted parts
Press [ ] to pause recording. (Press again to restart recording.)
To stop recording
Press [ ].
Almost all videos and DVD software on sale have been
treated to prevent illegal copying. Any software that has
been so treated cannot be recorded using this unit.
OPEN/CLOSE
REC
TIME SLIP HDD DVD DRIVE SELECT / 1.3 x
TIME SLIP CH
L/MONO - AUDIO IN - R
Audio/Video cable