Specifi Cations - Hitachi 42PD8900TA Service Manual

2. Specifications
Display dimensions
Panel
Resolution
Net dimensions
Net weight
Temperature
Ambient
conditions
Relative humidity
Power supply
Power consumption / at standby
Audio output
(VIDEO input)
Input terminals
Input signals
Output Signal
(RF input)
Input terminals
RF Video System
(RGB input)
Input terminals
Input signals
Sync signals
•The monitor takes at least 30 minutes to attain the status of optimal picture quality.
Applicable video signals for each input terminal
42PD8900TA
Approx. 42 inches
(922(H) x 522(V)mm, diagonal 1059mm)
1024(H) x 1080(V) pixels
including Opional Stand :
1134(W) x 728(H) x 350(D)mm
excluding Optional Stand :
1134(W) x 648(H) x 108(D)mm
including Opional Stand : 43.4kg
excluding Opional Stand : 37.7kg
Operating : 5°C to 35°C, Storage : 0°C to 40°C
Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)
AC100 - 240V, 50/60Hz
370W / <3W
speaker total 36W
AV1•2 : composite video input terminal (RCA) or component video input terminal (RCA)
L/R audio input terminal (RCA)
AV3•5 : composite video input terminal (RCA) or S video input terminal.
L/R audio input terminal (RCA)
AV4 : composite video input terminal (RCA)
L/R audio input terminal(RCA)
HDMI1•2 : HDMI input terminal
Audio input terminal (3.5mm Stereo Mini Jack)
Photo Input : Photo Input terminal / SD card slot
Composite video : PAL, SECAM, NTSC3.58, NTSC4.43, PAL60
Component video : 480i, 576i, 480p, 576p, 720p/50, 720p/60, 1080i/50, 1080i/60
OUTPUT (MONITOR) : composite video monitor-output terminal (RCA)
OUTPUT (MONITOR) : L/R audio monitor-output terminal (RCA)
OUTPUT (HEADPHONE) : L/R audio monitor-output terminal (Mini-pin)
OUTPUT (SUB-WOOFER) : Woofer output terminal
ANT : 75Ω Unbalanced
PAL B, G, H / I / D, K
SECAM B, G / D, K / K1
NTSC-M
Analog RGB input terminal (D-sub 15-pin)
Audio input terminal (3.5mm Stereo Mini Jack)
0.7V/1.0Vp-p, analog RGB (Recommended Signal)
H/V separate, TTL level [2KΩ]
H/V composite, TTL level [2KΩ]
Sync on green, 0.3Vp-p [75Ω]
Terminal RCA
Signal CVBS S-video
AV1,2
AV3
AV4
AV5*
HDMI1,2
RGB
Note : CVBS and S-video on AV5 should not be connected
at the same time to prevent interference on the picture
HDMI
Component RGB
4
D-sub
RGB
( :Available)