Automatic Privacy - Samsung DCS Compact II General Description Manual

Digital telephone system
Hide thumbs Also See for DCS Compact II:
Table of Contents

Advertisement

DCS Compact II General Description
CALL button automatically puts the call on hold when this feature is enabled.
Pressing TRSF, CONFERENCE, PAGE or a DSS key will always automatically place
the call on hold. This type of automatic hold is not a user–selectable option.

Automatic Privacy

All conversations on outside lines and intercom calls are automatically private.
The privacy feature can be turned off on a per–line basis.
Background Music
When customer–provided music sources are connected, each keyset user may
listen to background music. The HOLD button turns background music on or off
and the volume is controlled by the volume control keys. The number of music
sources is dependent on the number of Miscellaneous cards installed in the
system. Chime music is available from the Miscellaneous card.
Busy Station Callback
When reaching a busy station, callers may request a callback by pressing one
button or dialing a code. The system rings the caller back when that station
becomes idle (a system–wide maximum of 100 callbacks are allowed at one time,
including busy station and busy trunk).
Busy Station Indications (BLF)
DSS/BLF keys may be assigned to any keyset or add–on module. These buttons
will be off when the station is idle, light red when that station is in use and flash
distinctively when that station is in DND mode.
Call Forwarding
Station users can forward internal and outside calls to other destinations
immediately (Forward All), when busy (Forward Busy) or when not answered
within programmable duration (Forward No Answer).
These forward destinations can all be different. Once a destination has been
programmed, it can be turned on and off with a programmable key. Forward All
Calls takes priority over Busy and No Answer conditions.
In addition to the three usual methods of forwarding described above, a fourth
option called Follow Me is available. This option allows station users to set a
Forward All condition from his/her station to another station while at the remote
station. To display the Follow Me condition, the TRSF key lights steady red at the
4-23
Chapter 4. Features

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents