D-Link DNS-722-4 User Manual page 75

Section 3 - Configuration
Set Connections to the Units
Step 1: Click the Site Setup button.
Step 2: Input the unit name.
Step 3: Input the IP address.
Step 4: Modify the port if necessary.
Step 5: Input the user name.
Step 6: Input the password.
Step 7: Check the Save Password/
Auto Login option.
Step 8: Click the Test Server button to
test the connection between the local
application and the remote unit.
Step 8: Click the Add button to add this
unit into your remote server list.
Step 9: Click the OK button.
Site Setup
Set Groups for Cameras
Step 1: Click the Group tab.
Step 2: Log in to all the servers that contain the
camera(s) you would like to put into group(s).
Step 3: Click the Insert button to create a new group.
Step 4: Name this group.
Step 5: Highlight the camera(s) that you would like
to add into this group and then click the <- button.
Step 6: Repeat step 4 to establish the group.
Step 7: Repeat step 1 through 6
to establish other groups.
Step 8: Click the OK button.
D-Link DNS-722-4/DNS-726-4 User Manual 71