Resetting The Bridge; Effects Of The Reset Methods - HP 10:10 LAN Bridge MB Installation And Reference Manual

IP config
Displays the current values of the IP configuration parameters. For more information about the
IP parameters, see "IP config" in chapter 3, "Configuration".
WIldcard
Displays the current values of the wildcard filters. For more information about the wildcard
filters, see chapter 6, "How the Bridge Works", and "Wildcard Filters" in
chapter 3. "Configuration".

Resetting the Bridge

Four methods for resetting the HP 10:10 LAN Bridge MB are available. They are designated
as REset command, Reset button, cycle power, and Reset-Clear.

Effects of the Reset Methods

Each of these reset methods causes the bridge to execute self-test and re-initialize, but there are
differences in the other effects of each reset. Table 4-1 summarizes these effects.
Note
The Reset button and cycling power on the bridge perform the same functions.
The Reset button is the preferred method.
Caution
One of the effects of the Reset-Clear method is to erase the changes you have
made to the bridge configuration (including the address table) and to restore all
the default configuration values.
Operation 4-11