CHD200G series Fingerprint Reader 1. Products Introductions CHD200G series Fingerprint Reader is the second generation Fingerprint Reader of our company, integrates with strong 32bit RISC CPU and the advanced identify algorithm, also have Voice Remind functions. It provides the fast 1:1 or 1:N comparison, well-adapted standalone fingerprint identify products.
CHD200G series Fingerprint Reader red LED light and blue LED light blink once; swipe card, buzzer beep once, red LED light and blue light blink once. Standard: Fingerprint Enterprise Standard, Enterprise Standard No.: Q/NBL007-2006. Others: Keypad: 12 keys; Communication: RS485, use for fingerprint download or upload;...
CHD200G series Fingerprint Reader 3.2 Operation 3.2.1 Fingerprint scan method To take HD fingerprint image, , finger should be close to touch fingerprint sensor and refer to below picture and use correct method to scan the fingerprint: Pic a Pic b...
CHD200G series Fingerprint Reader 3.2.2.7 ID with password Input User and press # as the end, input the user password in 10s, if succeed, will output the User ID by the set Wiegand input format. If the device is as Out direction, output Wiegand 29 only.
CHD200G series Fingerprint Reader When have alarm (door switch, infrared) audion power on, relay action. Remark: OC door alarm output, need addition a outer relay and a DC12V power supply. 3.3.3 RS485 connections Attentions: 1. RS485 communication suggests use STP cable had better multi-core STP;...
CHD200G series Fingerprint Reader Color Function Remark +12VC Power supply Black Brown RS485A Upload or download data Grey RS485B Connect with controller Green Wiegand WD0 Wiegand, transfer White Wiegand WD1 fingerprint ID Yellow Alarm output Tamper alarm Orange Backup 5. Appearance and Dimension...
CHD200G series Fingerprint Reader 5.2 Dimension 6. Installation Defines Attentions: Fully consider easy for repair and maintains Location should avoid choose high temperature site Device can’t under straight sunlight Device can’t be shower bath Before installation please testing device 6.1 Installation tools and materials...
CHD200G series Fingerprint Reader Fingerprin t Reader Metal board 6.2.2.2 Cables connection Connection the cables according to the definition, and weld the cable joint to keep it fastness, and use the pyrocondensation tube to packing it well. Take care below points: 1) The power supply cable must connect correct, red cable to positive, black cable to negative, can’t be in reverse.