Reserve Trunk; Assigning A Station Number (Not For U.s.) - Siemens HiPath AllServe Operating Instructions Manual

Step by Step
Reserve trun k?
Program/Service
*
41=Temporary MSN?

Reserve Trunk

If this feature is configured (contact System Supp or t),
you can reserve a busy trunk for your own use.
When the trunk is free, you receive a call and a message
appears on the display.
Precondition: The message "US:Currently busy
UK:busy at the moment" appears on your screen.
Confirm.
When the reserved trunk becomes free:
Your telephone rings. The display shows " Trunk is free".
Lift the handset. You hear the CO dial tone.
Enter the number of the external station.
Assigning a Station Number (Not for
U.S.)
If this function has been configured (contact System
Support), you can selectively assign a specific number
(DID number) to your telephone before making an exter-
nal call. The assigned number then appears on the
called part y's display.
Press the key. The LED lights up
Select and confirm.
or
Enter the code.
Enter the DID numb er you wish to use.
Dial the external number.
Making Calls
29