Kenwood KVT-920DVD Instruction Manual page 62

Installation
2WARNING
Connecting the ISO Connector
The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper
connections to prevent damage to the unit.
The default connection for the wiring harness is described in 1 below. If the ISO connector pins are set as
described in 2 or 3, make the connection as illustrated.
1 (Default setting) The A-7 pin (red) of the vehicle's ISO connector is linked with the ignition, and the A-4 pin
(yellow) is connected to the constant power supply.
A–7 Pin (Red)
ACC
Vehicle
BATT
A–4 Pin (Yellow)
2 The A-7 pin (red) of the vehicle's ISO connector is connected to the constant power supply, and the A-4 pin
(yellow) is linked to the ignition.
A–7 Pin (Red)
Vehicle
ACC
BATT BATT
A–4 Pin (Yellow)
3 The A-7 pin (red) of the vehicle's ISO connector is not connected to anything, whilst the A-4 pin (yellow) is
connected to the constant power supply (or both the A-7 (red) and A-4 (yellow) pins are connected to the
constant power supply).
Connect to a power source
that can be turned on and
off with the ignition key.
Vehicle
BATT
A–4 Pin (Yellow)
Connector Function Guide
Pin Numbers for
Cable Colour
ISO Connectors
External Power
Connector
A–4 Yellow
A–5 Blue/White
A–6 Orange
A–7 Red
Speaker
Connector
B–1
Purple
B–2
Purple/Black
B–3
Gray
B–4
Gray/Black
B–5
White
B–6
White/Black
B–7
Green
B–8
Green/Black
62
Ignition cable (Red)
Battery cable (Yellow)
Ignition cable (Red)
Battery cable (Yellow)
Ignition cable (Red)
Battery cable (Yellow)
Functions
Battery
Power Control
Dimmer
Ignition (ACC)
+
Rear Right ( )
–
Rear Right ( )
+
Front Right ( )
–
Front Right ( )
+
Front Left ( )
–
Front Left ( )
+
Rear Left ( )
–
Rear Left ( )
ACC
Receiver unit
BATT
ACC
Monitor unit
BATT
Receiver unit
BATT
ACC
BATT
Monitor unit
ACC ACC
Receiver unit
ACC
ACC
Monitor unit
BATT
BATT