Advertisement
Mobile Station
Compact Lightweight Design
Measuring just 5.51 x 1.81 x 3.94 inches
(W x H x D) and weighing 1.01 pounds, the
KGP-2A can be easily installed in any vehicle.
Multi-purpose
Programmable I/O's
Each KGP-2A has sixteen programmable
I/O's for either an analog "input" or output"
[available at external connectors ACC2
(DB-9) & ACC-3 (DB-15)]. The inputs are
useful for vehicular sensors, switches,
contacts, etc. and generate a report to the
KGP-2B base unit each time the status
changes*. The outputs can be used to trigger
external relays and controls*. A KGP-2B base
unit can be commanded by a control/base
station computer running a KGP-2A/2B AVL
dispatcher application to activate/deactivate
KGP-2A fleet unit outputs and/or poll current
input/output status.
* Requires additional circuitry and added parts; also requires
a KGP-2A/B compatible AVL/dispatch software
capable of utilizing these I/O's.
Base Station
Compact Lightweight Design
Measuring just 5.51 x 1.81 x 3.94 inches
(W x H x D) and weighing 0.93 pounds,
the KGP-2B can be easily installed out of
the way base installation.
Options
KCT-34
KCT-40
Interface Cable
Interface Cable
(for TK-7180/8180
(for TK-780/880
980/981 mobiles)
7150/8150 mobiles)
*1
160G/62G-Series Mobiles: TK-760G/762G/860G/862G/768G/868G/863G except for European models
Applicable MIL-STD
Military Standard
Method / Procedure
810C
Dust
510.1/Proc. 1
Vibration
514.2/Proc. 8,10
Shock
516.2/Proc. 1,2,5
MIL-STD Environmental Standards
Compliance with MIL-STD 810 C/D/E environmental
standards for resistance to dust, vibration and shock
ensures stable performance even in demanding conditions.
KGP-2A
GPS RECEIVER-MODEM
MIL-STD Environmental Standards
Compliance with MIL-STD 810 C/D/E environmental stan-
dards for resistance to dust, vibration and shock ensures
stable performance even in demanding conditions.
KGP-2B
GPS CONTROLLER-MODEM
KCT-35
KCT-36
Interface Cable
Extension Cable
(for 60G/62G-Series mobiles)
*1
(for KCT-34/35/40)
Not all accessories may be available, please contact dealers for details.
Method / Procedure
Method / Procedure
810D
810E
510.2/Proc. 1
510.3/Proc. 1
514.3/Proc. 1 Cat.8
514.4/Proc. 1 Cat.8
516.3/Proc. 1,4
516.4/Proc. 1,4
DSP Modem
The receiver features a modern DSP-type
modem (Digital Signal Processor) capable
of 1200/2400 bps data communications.
rear panel
DSP Modem
The receiver features a modern DSP-type
modem (Digital Signal Processor) capable
of 1200/2400 bps data communications.
rear panel
Specifications
General Specification
Dimensions (W x H x D) without projections
Weight: KGP-2A
KGP-2B
Standard Input Voltage
(Input Voltage Range)
Temperature Range
Current Drain
GPS Receiver Unit (applies to KGP-2A only)
Receiver Type
Receiver Frequency
Supply Voltage to Antenna
GPS Backup Term
Modem
Modulation
Modulation Rate
Modem Encode Level Range
Modem Decode Level Range
Input Impedance
Output Impedance
LED Status Indicators
LEDs provide a quick troubleshooting indica-
tor to confirm DC power, data communica-
tions with the connected mobile radio or if
a GPS signal is being received.
Flash Memory
Flash memory permits uploading KGP-2A/2B
unit firmware upgrades with a computer.
Control
The KGP-2A/2B air protocol commands permit
a KGP-2B base unit to request any KGP-2A
fleet unit to send any currently stored data or
mobile station settings. AVL mapping / dispatch
CAD software developers are provided with
these commands and all protocol information
to utilize in their products.
Main Data TX Commands
Single Call
Multiple Call
Group Call
Auto Data TX
Request
District Call
Emergency
Input Data Request
(I/IO input ports; contact closures, sensors, etc.)
Main Mobile Station Settings
Outputs Data Request (I/O ports outputs)
GPS Data
LED Status Indicators
LEDs provide a quick troubleshooting
indicator to confirm DC power, data commu-
nications with the connected mobile radio.
Flash Memory
Flash memory permits uploading KGP-2A/2B
unit firmware upgrades with a computer.
5.51 x 1.81 x 3.94 in (140 x 46 x 100mm)
1.01 lbs (460 g)
0.93 lbs (420 g)
DC 13.6V negative ground
(DC 10.0V to 15.7V)
-22°F to + 140°F (-30°C to + 60°C)
< 300 mA (KGP-2A) , < 240 mA (KGP-2B)
Parallel 9 channels
1,575.42 MHz
DC 3.3V ± 0.2 V
More than 2 month (fully charged)
Minimum shift keying (MSK)
1,200 / 2,400 bps
100 ~ 1,000 mVrms
100 ~ 1,000 mVrms
600 Ω
600 Ω
Kenwood follows the policy of continuous advancement in development.
For this reason specifications may be changed without notice.
JQA-QMA1205
ADS#44507 Printed in USA
Advertisement
