Aborting The System Recovery Process - Sony Vaio Troubleshooting Manual

4-675-412-11.book Page 31 Friday, April 11, 2003 3:01 PM

Aborting the system recovery process

Before the actual recovery process begins, the VAIO System Recovery Utility makes it easy to cancel any settings
you may have made. Most screens remind you about the loss of data that will incur and you can either go back to the
previous screen (press Back), or abort the recovery setup altogether. To abort, remove the recovery disc, press
Cancel, and click Yes to confirm. The system reboots automatically.
However, once the recovery process has started, cancelling the job will delete all the current data on your C: drive. If
you make changes to the partition settings, you will lose all data on both hard drive partitions.
✍
If you do not remove the disc before pressing Cancel, the system recovery will start again.
31