Hitachi AJ-S55GZ User Manual page 6

Safety Precautions (continued)
Do not insert a screwdriver into the Lid
Lock hold.
Prohibited
To avoid injuries caused by the lock damage.
Do not pull the wire from the
socket when unplugging the unit.
Prohibited
To avoid electric shock or fire cause by short
ciruit may result.
Do not connect to the hot water supply.
And, water of above 50
used for washing.
Prohibited
Electric shock or leakage may occur
due to deformation of plastic parts of
the unit.
Please unplug the unit when not using
the unit for a long period of time.
Electric shock or leakage due to aging of insulator may
cause fire.
Check water supply hose connection
by turning on the water before
washing.
water
leakage
To prevent damages caused by possible water leakage
due to loosen screw.
When installing the washing machine,
be sure to draw out the water drainage
hose until the black and purple mark is
water
seen.
leakage
Failure to do so may cause friction leading to damage.
6
Warning
Attention
o
C should not be
o
50 C
Do not open the lid in locked status by force.
Otherwise, the lid or locking device
Prohibited may be damaged, resulting in
unstoppable spinning of washing •
spinning basket and thus causing
injuries.
Do not stand on or put weight on the
top of the unit.
Prohibited
Otherwise, deformation and damage
may result causing injuries.
Keep hands and feet away from the
bottom of the washing when it is motion.
Prohibited
Ports in motion beneath the
unit may cause injuries.
Water supply hose should be tightly
screwed to the unit.
water
leakage
Failure to do so may result in water leakage.
Used for a long period of time, the unit may
result in water leakage caused by loosen
union nut. So please check it in time and
screw tightly again.
Electricity supply must be unplugged
with dry hands during maintenance
and repair.
Otherwise, electric leakage causing
injuries may occur.
Union nut