Operation; Light Bulbs - Kenmore 233.503032 Use & Care / Installation Manual

OPERATION
Controls
The hood is operated using the slide controls
under the bottom of the hood.
The light switch turns the lamps on and off.
The blower switch :makes it possible to select
the motor operating speed. Position O: motor
off.
The pilot mamplights up whenever the blower
is on.
LIGHT
SWITCH
BLOWER
SWITCH
LIGHT BULBS
This range hood requires two 40-Watt light
bulbs (included).
ALWAYS SWITCH OFF THE ELECTRICITY
SUPPLY BEFORE CARRYING OUT ANY
OPERATIONS ON THE APPLIANCE.
To change bulbs:
1. Remove the screw securing the light fitting.
2. Replace with Hght bulbs of the same type+
CAUTION: BULB MAY BE HOT!