Forward Dnd; To Voice Mail - Samsung iDCS 500 General Description Manual

key is programmed as Forward All, the TRSF key lights steady when a Forward All
condition is set.
BUSY
This feature forwards all calls only when the station set is busy. The station user can
originate calls as usual.
NO ANSWER
This feature forwards calls that are not answered within a preprogrammed time.
The user can originate calls as usual and receive call if present. The timer is pro-
grammable on a per-station basis to allow for differences in individual work habits.
BUSY/NO ANSWER
This feature allows the station user to use both types of forwarding simultaneously,
provided the destinations have already been entered in the usual manner.

FORWARD DND

This feature works with the Do Not Disturb feature. This allows calls directed to a
station in Do Not Disturb or One Time Do Not Disturb to forward immediately to
another destination.
FOLLOW ME
This feature allows the user to forward all calls from another station to the user's
station or change the forward destination to the user's current location.
EXTERNAL
This feature forwards C.O. calls to an external number via a central office trunk if
allowed by class of service. Intercom calls may also be programmed to forward to
an external number via a central office trunk. These calls will forward only after the
programmable external call forward delay timer expires. This timer is program-
mable on a per station basis.

TO VOICE MAIL

Each station may be programmed to allow or deny the ability to forward intercom
calls to voice mail. When denied, valuable message time in the voice mail system
can be saved.
PRESET DESTINATION
If desired this feature provides for a permanent (preset) forward no answer desti-
nation for each extension. It can only be programmed by the system technician or
system administrator. When any station does not have FWD/NO-ANSWER set, the
call will ring this preset destination if one is programmed.
CALL FORWARD BUSY (CFB) (LE VERSION)
This is a different feature from the normal call forward busy and is only used when
the forward destination is in a different node of the network. The operation of the
4.8