Sharp IV-C35M User Manual page 120

Positional Deviation Measurement
How to set the register conditions
How to enter the REG-COND setting screen
There are three methods for getting to the REG-
COND setting screen.
1) On the MEAS CND setting screen, move the
cursor to "
4
the SET key. The cursor will move into the
table. Move the cursor to the "S" or "E" column
and press the SET key.
Note: If you press the SET key in the "X"
column, the setting will be invalid.
2) On the MEAS CND setting screen, press the
TRG/BRT key to move the cursor to the upper
function menu. Select the "COND" item and
then select the "REG-COND(S)" or "REG-
COND(E)" item and press the SET key.
3) On the menu tree, move the cursor to the
"MEAS CND" item, and press the right arrow
key. The sub menu which contains the "REG-
COND(S)" and "REG-COND(E)" items will
appear. Move the cursor to either of these items
and press the SET key.
MDL 0" or " MDL 1" and press
MEAS CND SCREEN COND SAVE
1DTECT PRECISION STANDARD
2REGISTER NO.
0(0~7)
3MODE
1P-SCH+1P-EDGE
4DTECT ANGL
NO
REGISTER NO.
00
5MDL 0
S
6MDL 1
SET=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
SELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE01
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS0(POSI-DEVIATION F)
POSI-CORRECT
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
OBJ-TYPE SYS.
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
4-4
BLUE F C1 BRT
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
IMG PRE-PROC
REG-COND(S)
REG-COND(E)
EVALUATION
DST&ANGL
NUM-CALC
OUT
COLOR F C1 BRT
1REGISTER NO.
2MEAS SHAPE(MDL0)
3SEARCH AREA(MDL0)
4DTECT MODE(MDL0)
5SEARCH DIR(MDL0)
6THRESHOLDS(MDL0)
7REF COORD(MDL0)
IMG PRE-PROC
MEAS CND
REG-COND(S)
REG-COND(E)
EVALUATION COND
DISTANCE&ANGLE COND
NUM-CALC
OUT-COND