Select A Desirable Location - Toshiba E-studio170F Quick Start Manual

1. SELECT A DESIRABLE LOCATION

The unit should be installed:
- On a horizontal surface.
- Away from direct sunlight, dust, extreme heat and humidity, and vibration.
- Away from sources of strong electrical or magnetic fields, such as televisions or radios.
- Within reach of an electrical outlet. Use an outlet not shared with equipment that generates electrical
noise or consumes large amounts of electricity, such as an air conditioner, or a copier.
- Within reach of a telephone connection. Use a dedicated, single-line telephone connection.
- Allow for adequate ventilation. The rear and sides of the unit need to be clear to allow proper air flow to
the unit's power supply.
3
WARNING
- After a suitable place has been selected for the installation of the e-STUDIO, please do not change it.
Avoid excessive heat, dust, vibration and direct sunlight. Also, provide proper ventilation as the facsimile
emits a small amount of ozone.
- The socket outlet should be installed near the equipment and be easily accessible.
- Pull out the plug from the outlet more than once a year to clean around the prongs. Accumulating dust
and dirt could cause a fire due to the heat released by electric leakage.
- Be sure to fix the power cable securely so that no one trips over it.
Be sure to hold the e-STUDIO170F by 2 places with both hands as shown in the illustration on the right.
16
3.SETUP FLOW