6.4 DE FACTO
6.4.1 S25 Detect DTR change time
Command
Response
set
S25=<n>
read
S25?
<n>
Mandatory for compatibility reasons. Time (in seconds) to react on DTR signal change. See
also command &D.
6.4.2 &S DSR signal behaviour
Command
Description
set
always on
&S[0]
normal operation
&S1
Mandatory for compatibility reasons. This is a dummy command for the Nokia D211.
6.4.3 &K Select flow control
Command
Description
set
no flow control
&K[0]
hardware flow control (RTS/CTS)
&K3
software flow control (XON/XOFF)
&K4
Mandatory for compatibility reasons (Microsoft Windows uses this). This command changes
the same setting as +IFC. Use of +IFC is recommended.
<n> values
0..255 (default 0)
000..255
44/113