HP 800 User Manual page 138

System Configuration
Quarantining, 802.1X
NOTE:
TIP:
3-90
9. Enter the Reconnect idle time. This is the amount of time in milliseconds
that a Telnet/SSH console can remain idle or unused before it is reset.
10. Select the Show scripts plus symbol to show the following scripts:
You must enter the script contents yourself for the 802.1X device you are
adding.
Initialization script – The expect script used to log into the console and
•
enter enable mode.
• Re-authentication script – The expect script used to perform endpoint
re-authentication.
Exit script – The expect script used to exit the console.
•
11. Click ok.
Click revert to defaults to restore the default settings.