Audio Keywords In The Visual Effects And Finishing Configuration File - HP xw8600 Workstation Hardware Setup Manual

Menu
Sync
System
Miscellany
Audio Keywords in the Visual Effects and Finishing
Configuration File
There are two keywords in the software initialisation file (by default, init.cfg) that must be uncommented
and set to the correct values to ensure Discreet Native Audio works properly. The first, Audiodevice, enables
Discreet Native Audio. The second, MidiDevice, determines whether control of the Lucid converter is remote
or local.
NOTE This does not apply to Lustre.
Keyword:
Audiodevice
MidiDevice
For additional information on these keywords and help setting them, see the Autodesk Visual Effects and
Finishing Installation and Configuration Guide.
Menu Item
For digital audio:
AES INs --> ADAT OUTs
AES INs --> AES OUTs
AES INs --> ANALOG OUT
Internal OFFExternal AES 1+2
Route Unit: 8
Setting:
AJA
If you are using local control of the converter, comment out this keyword.
If you are using remote control of the converter, uncomment the keyword, set the
serial port parameter to /dev/ttyS1 and leave all other parameters set to their default
value.

Audio Keywords in the Visual Effects and Finishing Configuration File | 29

Comment
External AES 1+2 is the recommended setting.