2.8
System Data Clear
Notice
After storing or changing the system programming data, it is
possible to clear your programming data stored in the system, if
required. The system will restart with the default setting.
1. Slide the System Clear Switch to the "CLEAR" position.
2. Press the Reset Button with a pointed tool.
3. Return the System Clear Switch to the "NORMAL" position
while the power indicator is flashing (approximately within 10
seconds).
After pressing the Reset Button, return the System Clear Switch to the
"NORMAL" position at step 3
(approximately within 10 seconds).
cleared.
while the power indicator is flashing
Otherwise, the system is not
Installation
2-79