5.9.2
Go to screen switch settings
1)
2)
Create a switch which can switch a base screen to another or display a window screen
by touch operation.
(1) Placing a Go To Screen Switch.
(2) Setting operation of Go To Screen Switch.
1)
Display Base Screen No. 1.
2)
Select the [Object] - [Switch] - [Go To Screen
Switch] menu.
3)
Move the cursor to the position where the Go
To Screen Switch is placed, and click the
mouse button.
4)
Click the right mouse button in the area other
than the touch switch to complete the
positioning of object.
5)
Double-click the touch switch which has been
placed.
1)
Check that "Base" is selected in [Screen
Type].
2)
Pressing the switch in [Go To Screen]
determines the screen to display.
"Fixed": switch to the Base Screen whose
screen No. is specified.
"Back (Previous/history)":
switch to previously displayed Base
screen.
Up to 10 screens can be switched
according to the history.
"Device": switch to the Base Screen whose
screen No. is specified depending
on the ON/OFF condition of the
specified bit device.
(this is useful for returning to the
previously displayed screen)
Here select "Fixed", and set "2" to switch to
Base Screen No. 2.
5 - 49