❏ The number of discs in the stacker does not exceed the limit specified for that disc.
& See "Mechanical" on page 102.
❏ The product is on a flat, stable surface that extends beyond the base in all directions.
The product will not operate properly if it is tilted.
Print Quality Problems
If you are having a print quality problem, then compare it with the illustrations below. Click
the caption under the illustration that best resembles your printout.
Good sample
"Horizontal banding" on page 85
"Horizontal banding" on page 85
Good sample
"Vertical misalignment" on page
85
"Vertical misalignment" on page
85
83
Troubleshooting