UNIVERGE SV8100
3.
Announce the call after tone burst or wait for call to be answered.
To place an outside call:
1.
Press TALK.
X icon is displayed
2.
Dial trunk access code and number
-OR-
Select trunk appearance and dial number.
Wait for call to be answered.
To answer an Incoming Ringing Call:
1.
When the handset is in the charger, lift it. icon is displayed.
2.
When the handset is out of the Base Unit, press TALK if ringing line preference is assigned.
icon is displayed.
3.
Talk.
To place a call on Hold (internal or outside):
With a call in process, press HOLD.
To retrieve a held call, press flashing F1~F4.
After a programmed time, the held call recalls to the originating terminal.
To redial a number:
1.
Press REDIAL.
2.
The previously dialed number is called.
To transfer a call:
1.
With a call in process, press TRANSFER.
2.
Dial Station Number.
- OR -
Press (F1~F4) programmed for Direct Station Selection (DSS).
3.
Announce call (optional).
4.
Press TALK to complete transfer.
term
D
Cordless II Terminal
.
Issue 11.0
2 - 543