Issue 11.0
3.
Select Outbound IP.
4.
Input Connection port (same as Program 90-69-01).
5.
Select Connect.
When PCPro does not receive a TCP established request within three minutes (fixed time), it ends the state of
"Attempting to Connect".
6.
Dial Outbound IP Connection Service Code (Program 11-15-16).
-OR-
7.
Call the DID that points to the Outbound IP Connection Service Code (Program 11-15-16) with
the matching CID (Program 90-69-03).
8.
After Connection hang up.
Refer to the UNIVERGE SV8100 PC Programming Manual for further operational details.
PCPro and WebPro Comparison
The table below gives a quick feature comparison of PCPro and WebPro. For further details refer to the
UNIVERGE SV8100 PC Programming Manual.
Feature
Installation Program
File Handling
File New/Open/Save/Save As
File Properties
Version Conversion
Programming
Offline
Modes
Live Update
2 - 1200
Table 2-71 PCPro and WebPro Comparison
Feature
Application
PCPro
Y
Y
Y
Y
Y
Y
WebPro
–
–
–
PCPro supports save/view/modify
UNIVERGE SV8100 Site Information,
password protect files, add notes,
connection settings.
–
PCPro can convert databases between
different UNIVERGE SV8100 versions.
–
Ability to program offline and upload to
the UNIVERGE SV8100 at a later date.
Y
Changes made in WebPro apply
immediately. No upload is required.
PCPro has Interactive Mode to make
live changes.
UNIVERGE SV8100
Comments
PC Programming