T1 Extension Outgoing Permitted Outside Line Assignment - Day - Panasonic KX-TD1232 Program Manual

General Programming
[728] T1 Extension Outgoing Permitted Outside Line Assignment –
Day
Description
Determines the outside lines which can be accessed by an extension on the T1 line in day mode.
The extension user on the T1 line can make outgoing outside line calls using the assigned
outside lines.
This program is available for the KX-TD1232 only.
Selection
• Port number:
01 through 24,
• Outside line number:
01 through 24,
( =all outside lines)
• Enable (to allow) / Disable (not to allow)
Default
All ports — Enable
Programming
1.
Enter 728.
Display: 728 T1 DAY OUT
2.
Press NEXT.
Display: Port NO?
3. Enter a port number.
To enter a port number 01, you can also press NEXT.
Display example: 01:CO01:Enable
4.
Enter the desired outside line number, or keep pressing
line is displayed.
To change the current entry, enter the new number.
5. Keep pressing SELECT until the desired selection is displayed.
Display example: 01:CO01:Disable
6.
Press STORE.
7.
To program another outside line, press NEXT or PREV, or SELECT and the desired port
line number.
8. Repeat steps 4 through 6.
9. Press END.
332
( = all ports)
or until the desired outside
Programming Guide