4. Connect one end of the interface cable to the computer connector inside the DM-D stand and
connect the other end to the RS-232 connector of the host personal computer. Tighten the
screws on both ends of the cables to fasten them.
5. When using as a standalone, go to step 7.
When using with a printer, connect one end of the printer interface cable for the printer to
the printer connector on the DM-D stand; then connect the other end to the connector on the
printer. Tighten the screws on both ends of the cable to fasten them
.
. A
Rev
computer
printer
DM-D110 Technical Reference Guide
Setup information 2-7