Dell 5130cn Service Manual page 36

Removal 9 LVPS ASSY (PL14.10.10)
Use a wrist strap to protect the PWB from electrostatic damage.
In the following steps, the details of Steps 1 through 3 are omitted because they are described earlier in
this chapter. Go to the steps in parentheses to execute the necessary steps, and then go to Step 4
onward.
1) Remove the TRAY STACKER. (Removal 1)
2) Remove the FINISHER ASSY. (Removal 2)
3) Remove the COVER ASSY FRONT. (Removal 5)
4) Remove the four screws (silver, flanged, 8mm) that fix the COVER RH (PL14.3.4) to the FINISHER
ASSY.
5) Remove the COVER RH from the FINISHER ASSY.
Continues to the next page.
Finisher Service Manual
Version 1 2009.03.31
Chapter 3 Removal and Replacement Procedures (RRPs)
4)
4)
3 - 22
4)
5)
4)
Tbt03514KA