Siemens HiPath 2000 Administration Manual page 78

Alphabetical Reference
HTTPs
•
International Dial Prefix
•
•
•
•
IP Routing
•
•
•
Java Gateway
•
•
•
Jitter Buffer
•
•
•
•
78
Enter the Port number for communication with the HTTPS server
(HTTP with SSL encryption).
Page 66
Only configurable on optiPoint 410/420 standard/advance and only
required if a display module or application module is used.
Specify the number that must be prefixed for dialing an international
telephone number, e.g. "00".
Canonical format
Default value Page 109.
Page 56
To have constant access to network subscribers in other domains, you
can enter a total of two more network destinations in addition to the
Default Route.
An IP Address of the domain and gateway and a
must be entered for each further domain you wish to use.
Default values Page 109.
Page 62
Only configurable on optiPoint 410/420 standard/advance and only
required if a display module or application module is used.
If a WAP server is available, enter the
communication with this server.
Default value Page 109.
Page 66
Select the duration of the interim storage here (number of data
packets) that changes the effect of the
Short 2 packets
Medium 4 packets
Long 6 packets
The more stable the network connection, the shorter the selected
buffer time (less voice delay).
Depending on the frequency at which the data packets are sent by the
terminal devices (e.g. 20 ms or 120 ms), this setting has a completely
different effect.
Default value Page 109.
Page 97.
Subnet Mask
Port number for
Jitter.