Remounting; Disassembly And Reassembly - Suzuki Jimny Service Manual

Disassembly and reassembly

1. Pulley
2. Front housing
3. Bearing
4. Retainer

Remounting

5. Rotor 9. Rear housing
6. Stator 10. Brush
7. IC regulator
8. Rectifier
1) Mount generator on the generator bracket.
2) Tighten generator bolts.
Tightening torque
Generator pivot bolt
(a) : 23 N·m (2.3 kg-m, 16.5 lb-ft)
(b) : 50 N·m (5.0 kg-m, 36.0 lb-ft)
3) Install generator (cooling fan) belt. Refer to "Water Pump
Belt and Cooling Fan" in Section 6B.
4) Connect "B" terminal wire (3) and coupler to generator.
Tightening torque
"B" terminal outer nut of generator
(b) : 8.0 N·m (0.8 kg-m, 6.0 lb-ft)
1. Upper generator bolt (Short)
2. Lower generator bolt (Long)
5) Install canister.
6) Connect negative (–) cable at battery.
CHARGING SYSTEM 6H-13