Network Configuration; Wireless; General - Canon WU10 User Manual

Wireless

If you click [Wireless] on the left menu, the page below is displayed.
This page shows the wireless operating status of this product.
Name Details
Displays the signal strength with an antenna
(Signal Strength)
image.
Current SSID Displays the current SSID.
Current Channel Displays the current channel.
Displays the current transfer rate. This item
Transfer Rate
appears only in Station mode.
30

Network Configuration

This section explains the Network Configuration pages of this product.

General

If you click [General] on the left menu, the page below is displayed.
In this page, you can configure the host name and network mode.
[General Configuration]
Name Details
Set the host name.
The host name is used for Scanner
Wireless Connection Utility, WINS,
Host Name
etc. Be sure to use a unique name
that is not used by any other
device.
Network
Displays the network mode.
Mode
Default Value
WU10-xxxxxx
(xxxxxx is the
last 6 digits of
the Mac
address)
–