AMAX 2100 / 3000 / 4000
Example : Data Bus Location 103 - DIP Settings
Figure 5.3: DX2010 DIP Switch Settings
Notice!
When the data bus address is changed, the module and the panel need to be re-powered to
enable the new address
5.3.3
Wiring
The following table and graphic show how to wire DX2010 to the option bus of the AMAX
panel.
Do not use twisted pair or shielded cables to connect DX2010 to the AMAX panel.
Power Supply
AMAX panel
AMAX panel (DX2010 out not
used)
External power supply
Table 5.6: Lengths of cable for DX2010
AMAX 4000
Figure 5.4: Connecting DX2010 to the AMAX panel
Bosch Sicherheitsysteme GmbH
AMAX 2100 / 3000
Optional Modules and Peripheral Devices | en
Wire diameter of 0.8mm
30m
305m
305m
DX2010
Installation Guide
Wire diameter of 1.2mm
76m
610m
610m
DX2010
_
+
12V
2014.11 | 02 | F.01U.267.112
17