Internal Temperature Thermistor - Brother DCP-9055CDN Service Manual

9.59 Internal Temperature Thermistor

(1) Remove the Internal temperature thermistor from the Main body.
Internal temperature thermistor
Assembling Note:
- Insert the tip of the Internal temperature thermistor firmly into the Insertion hole until it
reaches the end of the Hole.
- After inserting the Internal temperature thermistor, hang the Harness on the Hook.
Harness routing: Refer to
<Left side>
Fig. 3-194
Hook
Fig. 3-195
" Internal Temperature Thermistor"
3-139
Main body
Internal temperature thermistor
Main body
Confidential