5
Connecting the Power Cable
Power cable
Fuse resistor
Fuse resistor
Fuse holder (4 A)
Parking brake switch
Power supply side
Ground side
Note:
• The position of the parking brake switch
depends on the vehicle model.
5
6
Hide-away Unit
Violet/White (reverse gear)
Black (ground)
To vehicle (metal) body.
Red
To the electric terminal controlled by the ignition
switch (12 V DC) ON/OFF.
Do not connect this lead to power source terminals
to which power is continuously supplied. If the lead
is connected to such terminals, the battery may be
drained.
Yellow
To the terminal always supplied with power regard-
less of ignition switch position.
Light green
Used to detect the ON/OFF status of the parking
brake. This lead must be connected to the power
supply side of the parking brake switch.
Clamp the parking
brake switch power
supply side lead.
AVD-W6210/UC
6
7
Connecting method
Clamp firmly
with needle-nosed
pliers.
7
8
A
B
C
D
E
F
87
8