Table of Contents
Advertisement
- Edge mode (TriggerSequence0)
The exposure time is determined by Exposure Time setting.
- Level mode (TriggerSequence1)
The exposure time is determined by the pulse width of the trigger signal.
- Bulk mode (TriggerSequence6)
Camera exposes and transfers multiple frames by a single trigger.
Operation point of HardwareTrigger is at the edge of trigger signal, and active edge polarity is able to change
by register setting. And you can add delay time from trigger edge to exposure start by register setting.
Trigger signal
Exposure
USB bus
Details of Random Trigger Shutter operation, refer to "Timing" of "Specification".
Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved.
Trigger
Exposure
USB bus
Trigger
Exposure
USB bus
Trigger
ExposureTime
Exposure
USB bus
Trigger sequence
Trigger Delay
ExposureTime
Image
Pulse Width
Image
TriggerAdditionalParameter = 3
Image
Image
TriggerDelay
46 / 79
Image
Image
D4235159A
http://www.toshiba-teli.co.jp/index.htm
Advertisement
Table of Contents
