2.1.3 Web User Interface Setting List
Result Messages
When you click [Save] after changing the settings on the current configuration screen, one of the following
messages will appear in the upper-left area of the current configuration screen:
Result Message
Complete
Failed (Parameter Error)
Failed (Memory Access Error)
Failed (Busy)
46
Administrator Guide
Description
The operation has successfully completed.
The operation failed because:
•
Some specified values are out of range
or invalid.
The operation failed because:
•
Access error to the flash memory
occurred while reading or writing the
data.
•
A flash error occurred in reply to a
SIP-CS synchronization error.
•
The sent data was not created
correctly.
•
A flash error occurred while restoring
the data.
The operation failed because:
•
The SIP-CS is performing an operation
that accesses the flash memory of the
SIP-CS.
•
HSAPP resources cannot be reserved.
(The SIP-CS is busy.)
•
The specified S-PS is on a call. (The
S-PS's busy status is known in status
management.)
•
The specified S-PS is busy. (The
S-PS's busy status is not known in
status management.)
•
The SIP-CS is busy. (e.g., The flash
memory is in use.)
Applicable Screens
All screens except
•
2.2.3 CS Version List
•
2.2.5 PS Information
•
2.4.9 CS Management
•
2.4.10 Tree Survey
•
2.4.12 PS Registration
•
2.6.13 Export
Phonebook - PS
All screens
All screens
2.6.10 Import Phonebook -
All
2.6.13 Export Phonebook -
PS
2.7.2 Restore
All screens
2.6.11 Import Phonebook -
PS
2.6.11 Import Phonebook -
PS
2.6.11 Import Phonebook -
PS
2.7.1 Backup
2.7.2 Restore
Document Version 2013-03