Siemens Hicom 150 H Operating Instructions Manual page 10

$QVZHULQJ#&DOOV
6WHS#E\#6WHS
Name
Call waiting?
Name
Call waiting?
Release
Quit and return?
Return to held call?
43
$FFHSWLQJ#D#VHFRQG#LQWHUQDO#FDOO
...when an external call is in progress:
For example, "Call Key 1" is illuminated because you are
engaged in an external call. When the second internal
call is received the repdial key assigned to the internal
party (if programmed) starts flashing. You hear a signal
tone.
Press the rapidly flashing internal repdial key/DSS key (if
programmed).
or
Select and confirm.
You are now connected to the internal party and the in-
ternal repdial key/DSS key lights up. The external party
automatically goes on hold and "Call Key 1" starts flash-
ing slowly.
...when an internal call is in progress:
The repdial key of the internal party to whom you are
speaking (if programmed) lights up continuously. When
the second internal call is received the repdial key as-
signed to the calling internal party (if programmed)
starts flashing. You hear a signal tone.
Press the rapidly flashing internal repdial key/DSS key (if
programmed).
or
Select and confirm.
You are now connected to the internal party and the rep-
dial key/DSS key lights up. The first internal party auto-
matically goes on hold, and the repdial key assigned to
this party starts flashing slowly.
(QGLQJ#VHFRQG#FDOO#DQG#UHVXPLQJ#ILUVW#FDOO
Press the key.
or
Confirm.
or