Toshiba GL-10x0 Scan Operator's Manual page 39

3 Press
opens.
The scan parameters were set when the template was created. To
change the settings, see
4 Press
5 Continue with
Continue with
the originals on the glass.
Note: If you are using the ADF, the Scan Settings Summary screen
displays ADF in the scan settings summary area.
If you are placing the originals on the glass, the Scan Settings
Summary screen displays Glass and the auto detected original size in
the scan settings summary area.
GL-10x0 Scan Operator's Guide
. The Scan Settings and Agent Settings Summary screen
OK
Scan Settings and Agent Settings Summary Screen
on the control panel or S
START
ADF Scanning
Scanning from the Glass
Scan Parameter Settings
! to scan your document.
CAN
on page 30 if you are using the ADF.
on page 31.
on page 30, if you placed
29