Troubleshooting - Samsung SSA-R1000V User Manual

troubleshooting

TROUBLESHOOTING
If the product does not function properly, please see the below for trouble shooting.
PROBLEM
My card is not read properly.
When I turn on the product, it sounds a
beep with dimly turned on indicator.
SOLUTION
1) Check the rated voltage specifi ed in the user manual and the catalog.
2) Ensure that the card must comply with the PSK (125 KHz Proximity ) format
provided by Samsung.
Cards of 125 kHz purchased from other manufacturers may not be supported.
3) If the problem persists, contact the nearest customer service for your
assistance.
1) Ensure that you are using a larger-capacity adaptor than specifi ed in the user manual or the
catalog, which should cover the rated current consumption of the reader. If you are using
multiple readers that are connected to one adaptor, make sure that the adaptor should be
large enough to cover the current consumption multiplied by the reader count.
2) Even with a large adaptor enough to supply adequate power, if the power cable is
not a dedicated line (such as communication line or UPT cable), or if it's so long to
cause power loss, you'd better replace it with a dedicated line or reinforce it.
3) If the problem persists, contact the nearest customer service for your
assistance.
EnglisEnglish _ 15