Cable and Adapter Specifications
Rollover Cable and Adapter Pinouts
Identifying a Rollover Cable
Catalyst 2950 Desktop Switch Hardware Installation Guide
B-14
This section describes how to identify a rollover cable and also describes the
adapter pinouts.
You can identify a rollover cable by comparing the two modular cable ends. Hold
the cable ends side-by-side, with the tab at the back. The wire connected to the
pin on the outside of the left plug should be the same color as the wire connected
to the pin on the outside of the right plug. (See
Figure B-14 Identifying a Rollover Cable
Pin 1 on one connector and
pin 8 on the other connector
should be the same color.
Pin 1
Appendix B
Connectors and Cables
Figure
B-14.)
Pin 8
78-11157-05