Table of Contents
Advertisement
EdgeMarc 4500 SOHO Router Installation Guide
Wall-Mount Installation
You can mount the EdgeMarc 4500 on a wall using the two mounting brackets on the bottom of
the appliance. We recommend that you use two round or pan head screws.
1. Install two screws 5.9063" (150 mm) horizontally apart on a wall or other vertical surface.
The screws should protrude from the wall so that you can fit the appliance between the
head of the screw and the wall.
If you install the screws in drywall, use hollow wall anchors to ensure that the unit does not
pull away from the wall due to prolonged strain from the cable and power connectors.
2. Remove the EdgeMarc 4500 and accessories from the shipping container.
3. Mount the EdgeMarc 4500 on the wall as shown below.
4. Do not mount the EdgeMarc 4500 on the wall as shown below.
8
Advertisement
Table of Contents
