General Safety Rules WARNING! Read all instructions. Failure to follow all d) Remove any adjusting key or wrench before instructions listed below may result in electric shock, fire turning the power tool on. A wrench or a key left and/or serious injury. The term “power tool” in all of the attached to a rotating part of the power tool may re- warnings listed below refers to your mains operated sult in personal injury.
c) Use power tools only with specifically designat- e) Under abusive conditions, liquid may be ejected ed battery packs. Use of any other battery packs from the battery; avoid contact. If contact acci- may create a risk of injury and fire. dentally occurs, flush with water.
Hold the power tool only by the insulated For Your Safety gripping surfaces, when performing an op- eration where the cutting tool may run into Working safely with this ma- hidden wiring or its own cord. chine is possible only when the Contact with a “live”...
Never allow children to use the machine. Place the protection guard 6 with coded projec- Bosch is only able to ensure perfect operation tion 14 into the coded groove on the spindle col- of the machine if the original accessories in- lar of the machine head and rotate to the required tended for it are used.
Page 9
Flap Disc Mounting the Grinding Tools Depending on the application, remove the protec- Before any work on the machine itself, pull tion guard 6 and mount the hand guard 18. Place the mains plug. the special mounting flange 9 (accessory, Order No.
Page 10
Approved Grinding Tools Quick Clamping Nut Instead of the clamping nut 11, the quick-clamp- All grinding tools mentioned in this operating ing nut 12 (accessory) can be used. Grinding manual instruction can be used. tools can then be mounted without using tools. The permissible speed [rpm] or the circumferen- The quick-clamping nut 12 may be used only tial speed [m/s] of the grinding tools used must at...
Use only Grinding and cutting discs become very original Bosch grinder stands. hot while working; do not touch until they have cooled. Rough Grinding...
This is clearly indicated by circular centre for Bosch power tools. sparking, rotating with the diamond cutting disc. In all correspondence and spare parts orders,...
Page 13
* Des idées en action. Bosch Power Tool Division Motor Industries Co Ltd Chlor P B No 3000, Audugodi Hosur Road, Bangalore 560 030 Ph: + 91 (0)80 - 22 99 28 66/22 99 95 15 1 609 929 F75 (04.03) O / 16...