4.2.4 Troubleshooting Based on Problem Type
[ 1 ] Control panel and LCD problems
Problem
(1) LCD shows nothing.
(2) Control panel inoperative.
(3) Touch panel inoperative.
[ 2 ] FAX/Telephone problems (For MFC only)
Problem
(1) No faxes will be able to be sent.
(2) Speed dialing will not work.
(3) Dial does not switch between
tone and pulse.
(4) The ringer does not sound.
(5) No phone call can be made with
the handset.*
For models with handset
*
• LCD and its flat cable
• Panel-main harness
• Control panel PCB-to-PCB harness (for models with touch
panel)
• Control panel PCB
• Power supply PCB
• Main PCB
• Panel-main harness
• Control panel PCB
• Rubber keypads
• Main PCB
• Adjust the touch panel with Function code 78 in the
maintenance mode. (Refer to
• Touch panel harness
• Touch panel relay PCB (in the LCD unit)
• LCD unit
• Main PCB
• Hook switch*
• Rubber keypads
• Control panel PCB
• Main PCB
• MJ PCB
• Ordinary dialing function
If it works normally, check the main PCB; if not, refer to item
(1) above.
• Main PCB
• Speaker harness
• Speaker
• Main PCB
• MJ PCB
• Curled cord
• Handset
• Hook switch PCB
• Main PCB
4-34
Check:
Chapter 9, Section
9.4.28.)
Check:
Confidential