Bosch VJD-7000 Installation Manual

Bosch VJD-7000 Installation Manual

Videojet decoder 7000

Advertisement

VIDEOJET decoder 7000
VJD-7000
en
Installation Manual

Advertisement

Table of Contents
loading

Summary of Contents for Bosch VJD-7000

  • Page 1 VIDEOJET decoder 7000 VJD-7000 Installation Manual...
  • Page 3: Table Of Contents

    Mounting Connection Sequence of connections Connecting monitors Establishing the network connection Connecting audio Connecting the power supply Power on/power off Configuration Setup Setup using Bosch Video Client Troubleshooting Contact General malfunctions Power light and LEDs Maintenance Updates Repairs Decommissioning Transfer...
  • Page 4: Safety

    – If safe operation of the unit cannot be ensured, remove it from service and secure it to prevent unauthorized operation. In such cases, have the unit checked by Bosch Security Systems. Safe operation is no longer possible in the following cases: –...
  • Page 5: Firmware And Software

    Safety | en Firmware and software – VIDEOJET decoder 7000 may only be operated with the installed firmware and software products. – It is not allowed to install additional firmware or software. Bosch Sicherheitssysteme GmbH Installation Manual 2013.07 | V1 | DOC...
  • Page 6: Short Information

    30 images per second. The unit is intended for use with CCTV systems. Other applications are not permitted. In the event of questions concerning the use of the unit which are not answered in this manual, please contact your sales partner or: Bosch Sicherheitssysteme GmbH Robert-Bosch-Ring 5 85630 Grasbrunn Germany www.boschsecurity.com...
  • Page 7: Rating Plate

    For exact identification, the model name and serial number are inscribed on the bottom of the housing. Please make a note of this information before installation, if necessary, so as to have it to hand in case of questions or when ordering spare parts. Bosch Sicherheitssysteme GmbH Installation Manual 2013.07 | V1 | DOC...
  • Page 8: System Overview

    Core i3 CPU running at 3.1 GHz. The system has a 16 GB Flash module as boot medium for operating system and application. It uses a Gigabyte Ethernet port. The system runs a tailored and Bosch-branded Microsoft Windows 7 Embedded operating system, and Monitor Wall software based on HD-capable VideoSDK 5, both fine-tuned for HD video decoding support.
  • Page 9 No other than Microsoft and Bosch software is running on the decoder. Its firewall performs at the highest security level and allows communication only for a minimum of needed services. All access is...
  • Page 10 Password protection to prevent unauthorized connection or configuration changes – Convenient maintenance via uploads – Flexible encryption of control and data channels – Bidirectional audio (mono) for line connections – Audio coding according to international standard G.711 2013.07 | V1 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...
  • Page 11: Connections, Controls And Displays

    DVI-I monitor socket for connecting a monitor via DVI-I cable HDMI monitor socket for connecting a monitor via HDMI cable USB ports DP monitor socket for connecting a monitor via DP cable Bosch Sicherheitssysteme GmbH Installation Manual 2013.07 | V1 | DOC...
  • Page 12 3.5 mm / 1/8 in stereo sockets line-out/line-in for audio connections Main switch for switching the unit on and off, lights up blue when the unit is switched on See also – Power light and LEDs, page 19 2013.07 | V1 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...
  • Page 13: Installation

    Position and run all cables so that they are protected from damage, and provide adequate cable strain relief where needed. – Avoid impacts, blows, and severe vibrations that exceed the specification limits, as these can irreparably damage the unit. Bosch Sicherheitssysteme GmbH Installation Manual 2013.07 | V1 | DOC...
  • Page 14: Mounting

    If mounting the unit to the back of a monitor, use only monitors that are approved by Bosch Security Systems. You can obtain a list of approved monitors from your supplier or directly from Bosch Security Systems.
  • Page 15: Connection

    Connecting monitors You must connect a suitable monitor to the decoder. You can obtain a list of approved monitors from your supplier or directly from Bosch Security Systems. This list is constantly being updated and extended. The unit provides three monitor outputs, DVI-I, HDMI and DP; two of these can be used at the same time.
  • Page 16: Connecting The Power Supply

    Switch on the monitor in order to see the user interface after the boot-up procedure. All information regarding the functions and the operation can be found in the relevant documentation of Monitor Wall, Bosch Video Management System, or Video Client. 2013.07 | V1 | DOC...
  • Page 17: Configuration

    Setup using Bosch Video Client For the current version of our Video Client management software, access your Bosch product catalog on the Internet. This program allows you to implement and set up the unit in the network quickly and conveniently.
  • Page 18 | Configuration VIDEOJET decoder 7000 Note that the audio function is not activated by default. To use audio connections activate the corresponding setting when configuring the unit. 2013.07 | V1 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...
  • Page 19: Troubleshooting

    Contact If you are unable to resolve a malfunction, please contact your supplier or systems integrator, or go directly to Bosch Security Systems Customer Service. The following tables are intended to help you identify the causes of malfunctions and correct them where possible.
  • Page 20 Off: LAN connection not established. Green: LAN connection established. Blinking green: LAN activity occurring. Right LED: Off: 10 Mbps data rate. Green: 100 Mbps data rate. Yellow: 1000 Mbps data rate. 2013.07 | V1 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...
  • Page 21: Maintenance

    Ensure that all maintenance or repair work is carried out only by qualified personnel (electrical engineers or network technology specialists). In case of doubt, contact your dealer's technical service center. Bosch Sicherheitssysteme GmbH Installation Manual 2013.07 | V1 | DOC...
  • Page 22: Decommissioning

    VIDEOJET decoder 7000 should only be passed on together with this installation manual. Disposal Your Bosch product is designed and manufactured with high-quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.
  • Page 23: Technical Data

    0 to 90% atmospheric humidity, non-condensing Thermal value Approx. 210 BTU/h, 460 BTU/h max 10.4 Certifications and approvals Safety IEC 60950 Electromagnetic EN55022 compatibility EN55024 FCC 47 CFR Chapter 1 Part 15 Approvals CE, UL Bosch Sicherheitssysteme GmbH Installation Manual 2013.07 | V1 | DOC...
  • Page 24: Standards

    80 kbps at 8 kHz sampling rate Ethernet 10/100/1000 Base-T, auto-sensing, half/full duplex, RJ45 Protocols IPv4, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ARP, DHCP, SNTP, digest authentication Encryption TLS 1.0, SSL, DES, 3DES, AES 2013.07 | V1 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...
  • Page 25: Index

    Regulations, 6 Installation, 4 Repair, 4, 21 Installation conditions, 13 Installation location, 13 Safety, 4 IP address Serial number, 7 Default, 17 Software restart, 17 Symbols, 6 Low Voltage Directive, 6 Bosch Sicherheitssysteme GmbH Installation Manual 2013.07 | V1 | DOC...
  • Page 28 Bosch Sicherheitssysteme GmbH Robert-Bosch-Ring 5 85630 Grasbrunn Germany www.boschsecurity.com © Bosch Sicherheitssysteme GmbH, 2013...

Table of Contents