Audio Menu - Sony HT-M7 Operating Instructions Manual

AUDIO menu

You can adjust settings for the audio to suit
your preference.
x A/V SYNC
Lets you delay the output of audio to minimize
the time gap between audio output and visual
display.
• SYNC ON (Delay time: 60 ms)
The audio output is delayed so that the time
gap between the audio output and visual
display is minimized.
• SYNC OFF (Delay time: 0 ms)
The audio output is not delayed.
Notes
• This parameter is useful when you use a large LCD
or plasma monitor or a projector.
• The delay time may vary depending on audio
format, sound field and speaker distance settings.
x DUAL
Lets you select the language you want to listen
to during digital broadcast when available.
This feature only functions for Dolby Digital
sources.
• MAIN/SUB
Sound of the main language will be output
through the front left speaker and sound of
the sub language will be output through the
front right speaker simultaneously.
• MAIN
Sound of the main language will be output.
• SUB
Sound of the sub language will be output.
x IN MODE
Lets you set the audio input mode of inputs.
For details, see "Switching between digital
and analog audio (INPUT MODE)" (page 46).
x PLII DEC.
Lets you turn the Pro Logic II decoding mode
on or off.
• AUTO
Applies the Pro Logic II decoding mode
automatically when receiving the Dolby
Surround encoded signals.
• ON
Applies the Pro Logic II decoding mode
when receiving 2 channels signals.
• OFF
Pro Logic II decoding mode is turned off.
Note
This function works only in the following cases.
– "MOVIE A" is selected.
– Surround speaker position is set to "REAR".
HDMI menu
You can make the required settings for
equipment connected to the HDMI jack.
x CTRL.HDMI
Lets you turn the Control for HDMI function
on or off. For details, see ""BRAVIA" Sync
Features" (page 42).
x PASS.THRU
Lets you output the HDMI signals to the TV
even when the receiver is in standby mode.
• ON
When the receiver is in the standby mode,
the receiver continuously outputs HDMI
signals from the receiver's HDMI TV OUT
jack.
• AUTO
When the TV is turned on while the receiver
is in the standby mode, the receiver outputs
HDMI signals from the receiver's HDMI TV
OUT jack. Sony recommends this setting if
you use a "BRAVIA" Sync compatible Sony
TV. This setting saves power in the standby
mode when compared with the "ON"
setting.
continued
51
GB