Communication Report Print
You can request a communica-
1
tion report every time a docu-
ment is sent. If you desire a
communication
report
every
time you send a document, set
Load the document face down
this function to ON as a default
in the Document Support (see
(see page 187).
page 82).
If you plan to use communica-
Adjust the resolution and con-
tion reports only occasionally,
trast if desired (see pages 83
use this procedure. The TX Re-
and 84).
port key allows you to obtain a
report for one communication
only.
You can activate this option
while programming an Abbrevi-
ated Dial Number (see page 65)
or One Touch Dial Key setting
(see page 71) if communication
with a specific remote party al-
ways requires this option.
186
2
Load the Document
Select the function key on the
Operation Panel.
Press:
MAY-17 09:43 AM 100%
TX REPORT
AUTO RECEIVE
1.ALWAYS
2.ON ERROR
3
Display the TX
Select the Option
REPORT Menu
To set the DP80F/DP85F to al-
ways print a communication re-
port, press:
To set the DP80F/DP85F to
only print a communication re-
port when an error condition is
encountered, press:
3.OFF
To set the DP80F/DP85F to
never print a communication re-
port, press:
MAY-17 09:43 AM
ENTER TEL NUMBER
4
Enter the Facsimile
Number
Enter the number of the remote
facsimile using any of the fol-
lowing dialing methods.
•
One Touch Key Dialing
... See page 89
•
Abbreviated Dialing
... See page 90
•
Alphabet Dialing
... See page 91
•
Keypad Dialing
... See page 92
80%