Bosch FPC-500-2 Operation Manual page 25

Conventional Fire Panel
Displaying the configuration
Press the "Menu" key and then zone key 5.
i
5
This takes you to the View Config submenu.
The set configuration is automatically shown in the LCD
i
display. The individual settings are displayed successively at
2.5-second intervals. If you use the arrow keys to navigate
manually through the configuration display, the automatic
process is cancelled.
Press the "Reset" key.
You exit the configuration display.
RESET
Setting the date/time
Press the "Menu" key and then zone key 6.
i
6
This takes you to the System Config submenu.
Press zone key 1.
1
You can now set the date and time.
The current entry is displayed.
i
Use the arrow keys to change the flashing value.
To save the currently displayed value, press the ACK key.
ACK
Repeat the steps to set the month, year, hour and minute.
Setting the buzzer beep
Press the "Menu" key and then zone key 6.
i
6
This takes you to the System Config submenu.
Press zone key 2.
2
You can now set the buzzer beep.
Press the zone keys to set the buzzer beeps:
2
1
...
–
–
Bosch Sicherheitssysteme GmbH
1=On (default setting)
2 Off
Operation Guide
Operation | en
F.01U.172.982 | 5.0 | 2012.04
25