Bosch Integral TM13 Operating Instructions Manual page 122

If in doubt, look it up
Mode of operation
Simple (default setting):
Three menu items are displayed at once (preview).
Standard:
Only one menu item at a time is displayed. This operating mode is active
when you put your telephone into operation.
Softkey:
The functions that you can perform during a call are displayed as softkeys.
Modify entry
You can modify the entry, e.g. enter a new call number for an existing
name.
Modify handsfree mode
If the remote subscriber tells you that the transmission quality during hands-
free mode is not satisfactory, you can adjust this setting to suit the particular
ambient conditions in the room.
The setting on the extreme left permits the highest quality for Intercom but
also implies the strongest echo.
The setting on the extreme right implies the weakest echo but reduces the
quality during Intercom.
Monit.AEI x/y calls
You can connect a PC to your telephone and operate your phone from the
PC using the corresponding software. You can set up your phone in such a
way that monitoring is automatically activated when you dial from your PC.
N
Name
Enter the name.
New entry
You can enter a new call number in the telephone book.
New: from Pa X to Pa Y
You can enter call diversion from partner X to partner Y.
Press the corresponding partner keys.
Next
The next entry is displayed.
122
Menu items on the display "