●
Positioner
Settings: Configures the aerial positioner.
Positioner: Enables or disables the positioned control.
Positioner
Type: Sets the positioned type between DiSEqC 1.2 and USALS (Universal Satellite
Automatic Location System).
–
My
Longitude: Sets the longitude for my location.
–
My
Latitude: Sets the latitude for my location.
–
Satellite Longitude
User
Mode: Sets the position of satellite aerial according to each satellite.
If you store the current position of satellite aerial according to a certain satellite, when the signal
of that satellite is needed, the satellite aerial can be moved to pre-populated position.
–
Satellite: Selects the satellite to set the position for.
–
Transponder: Selects a transponder from the list for signal reception.
–
Moving
Mode: Selects the movement mode between discrete and continuous movement.
–
Step
Size: Adjusts the step size degrees for the aerial rotation. Step Size is available when
Moving Mode is set to Step.
–
Go To Stored
–
Aerial
Position: Adjusts and stores the aerial position for the selected satellite.
–
Store Current
Installer
Mode: Sets limits to the scope of movement of satellite aerial or reset the position.
Generally, installation guide uses this function.
–
Limit
Position: Selects the direction of the positioner Limit.
–
Aerial
Position: Adjusts and stores the aerial position for the selected satellite.
–
Store Current
–
Go to
zero: Moves the aerial to the reference position.
–
Reset positioner
●
Reset all
settings: All satellite settings will be reset to the initial values.
Settings: Sets the longitude of user defined satellites.
Position: Rotates the aerial to the stored satellite position.
Position: Stores current position as the selected positioner limit.
Position: Stores the current position as the selected positioner Limit.
limit: Allows the aerial to rotate over the full arc.