Yamaha YB50 Service Manual page 120

FRONT FORK
3. Install:
• Retainer
• Dust guard
NOTE:
Couple the retainer correctly on the groove of
the outer tube
4. Fill :
• Fork oil
Each fork:
50 cm
10 W fork oil or equivalent after
filling, slowly pump the fork to
distribute the oil.
Oil level:
95 mm
From the upper part of the inner
fork tube totally compressed wit-
hout the spring.
NOTE:
Place the fork in a vertical position.
5. Install:
• Fork spring
• Cover
• Restraining ring
• Rubber cap
NOTE:
• Before installing the cover, apply grease to
the o-ring.
• Couple the restraining ring correctly on the
inner tube groove.
6-17
CHAS
.
3